EN50306-4 electrical cable USAGE SCOPE
EN50264-3-4 cable is Low Smoke Halogen Free Standard Wall Thickness Single Core with strong flame retardant. It has better fire resistance and shielding. This unit relates to power and control cables and their associated lines, which can reduce the hazard to people in case of fire and improve the safety of transportation. The insulation and sheath are made of halogen-free materials. In case of fire, this unit can limit the spread of flame, reduce the emission of toxic gases and smoke, reduce the loss of visibility, and enable personnel to evacuate quickly.
The new EN50306 railway cable is based on the newly developed halogen-free electron beam crosslinked insulation system EI 306 and sheathing materials, and meets the specifications of standard EN50306 cables. The cable is suitable for fixed wiring of vehicles, as well as slightly flexible wiring and electrical energy transmission. EN50306 is suitable for miniaturized wire and cable of vehicle equipment electrical device.
EN50306-4 electrical cable Reference Standards
Comply with TJ/CL313-2014 Technical requirements for wires and cables of EMU
Pass BS6853:1999 and DIN5510-2:2009 Fireproof, smoke and toxicity testing
Comply with the requirements of internal and external cables of Class Ia, Ib and II locomotives in BS6853:1999
Comply with the requirements of flammability class S1~S5 in DIN5510-2:2009
EN50306-4 electrical cable Usage Features
- The rated AC voltage level: 300V, 600V
- Temperature resistance range: – 40~105 ℃
- The outer diameter of the cable is smaller and the weight is lighter. The cable adopts single-layer insulation structure or double-layer insulation structure.
- Passed BS6853, DIN5510-2, EN45545-2 fire protection R15, R16 (HL3 level)
- Insulation strength: >10Mpa
- Elongation at break: >125%
- Bending radius: fixed laying 5D; Non fixed laying 6D (D refers to the outer diameter of the cable)
- The cable meets the low-smoke and halogen-free performance. The gas release testing during cable combustion meets the requirements of total halogen gas < 5mg/g, pH value ≥ 4.3, conductivity≤10us/mm and light transmittance≥80%.
- Toxicity index: The equivalent European standard toxicity index shall not be greater than 3, and the equivalent TB standard toxicity index shall not be greater than 5.
- The cable can be used in the occasion polluted by mineral oil and fuel oil.
- The cable is resistant to single cable vertical burning.
- Solvent resistance, acid and alkali resistance.
- Cables can be produced in various colors according to customer requirements.
EN50306-4 electrical cable structure DIAGRAM
Thin wall thick single-core unshielded cable EN50306-3 300V MM
A: Tinned copper annealed copper wire Class 5 conductor
B: Irradiated cross-linked polyolefin insulation
thin wall thick multi-core cable EN50306-4 3P/3E/5P/5E 300V MMS
A: Tinned copper annealed copper wire Class 5 conductor
B: Irradiated cross-linked polyolefin Insulation
C:Tinned copper braided shielding
D:Irradiated cross-linked polyolefin or rubber elastomers sheath
Product specification
| Model | Voltage class | Number of cores | Section (mm²) |
| Multi-core thin-wall insulation thin-wall sheath unshielded cable （EN50306-4 1P） |
300V or 600V | 1~48 | 0.5~4mm² |
| Multi-core thin-wall insulation standard thick-walled sheathed unshielded cable (EN50306-4 1E) |
300V or 600V | 1~48 | 0.5~4mm² |
| Multi-core thin-wall insulation thin-walled sheathed total shielded cable (EN50306-4 3P) |
300V or 600V | 1~8 | 0.5~4mm² |
| Multi-core thin-wall insulation standard thick-walled sheathed total shielded cable (EN50306-4 3E) |
300V or 600V | 1~8 | 0.5~4mm² |
| Twisted-pair type thin-wall insulation thin-wall thick sheathed separately shielded cable （EN50306-4 5P） |
300V or 600V | 2~7 pairs | 0.5~1.5mm² |
| Twisted-pair type thin-wall insulation standard thick-walled sheathed separately shielded cable (EN50306-4 5E) |
300V or 600V | 2~7 pairs | 0.5~1.5mm² |
